Castable Resin for Jewelry 500ml

1,099.00 DH

Available on backorder

SKU: 3DWIZMX2QXSHI Categories: , , Tags: , , , Brand:

Description

Description

The resin developed for jewelry casting; very little burning ash and residues, good casting performance, can produce high-quality jewelry pieces; high precision, the details of the fine and complex models in the jewelry industry are clearly visible; used for the loss of gold, silver and copper ornaments Wax casting.

 

* Application
Jewelry
* Print model
  • castable resin for jewelry_Print model
  • castable resin for jewelry_Print model_1

Castable resin for Jewelry Recommended Settings For Printer:

Castable resin for Jewelry Recommended Settings For Printer
Exposure Time?s? Bottom Exposure Time?s? Layer Height?mm? Bottom Layer Height?mm? Lift Distence(mm) Bottom Lift Distence(mm) Retract Distence(mm) Bottom Retract Distence(mm) Lift Speed(mm/min) Bottom Lift Speed(mm/min) Retract Speed(mm/min) Bottom Retract Speed(mm/min)
ELEGOO Saturn 5,2 50 0,05 5 7 7 7 7 70 70 210 210
ELEGOO Mars 2 Pro 5 50 0,05 5 5 5 5 5 80 60 210 210
ANYCUBIC Photon Mono X 2 50 0,05 6 8 8 8 8 180 180 240 240
ANYCUBIC Photon Mono 4K 5,5 50 0,05 6 6 / 6 / 240 / 360 /
ANYCUBIC Photon Mono SE 4,5 40 0,05 6 6 6 6 6 240 240 240 240
VOXELAB Proxima 8.9 4,5 55 0,05 5 8 8 8 8 60 60 150 150
PHROZEN Sonic Mighty 4K 5,5 50 0,05 6 8 8 8 8 60 60 150 150
CREALITY HALOT ONE 6 60 0,05 10 6 / 6 / 60 / 60 /
CREALITY LD006 3 45 0,05 5 7 7 7 7 70 70 150 150

Fast profile (0.1 mm layers)

Use 0.1 mm layers for size checks and draft patterns only. Layer lines transfer to the metal, so print final patterns at 0.05 mm or finer.

Setting Starting value
Layer height 0.1 mm
Layer exposure About 1.5 × your 0.05 mm layer exposure
Bottom layers and bottom exposure Same as your 0.05 mm settings
Lift and retract Same as your 0.05 mm settings

Calculated starting values, not manufacturer test data. Print an exposure test (RERF or validation matrix) first and adjust for your printer.

Reduce metal weight in jewellery

  • Design to the low side of your tolerance: a wall modelled at 1.0 mm instead of 1.2 mm uses about 17% less metal in that area.
  • Measure before you thin: print and cast a test ring, then apply the real shrinkage and polishing allowance in your CAD or with your slicer’s size compensation.
  • Hollow bulky sections such as heads, pendants and thick shanks, and leave openings so the investment can fill them.
  • Keep walls thick enough for the metal to fill. A minimum of 0.6–0.8 mm is common; confirm it with your casting house.

Frequently asked questions

What are the delivery times and methods?

Shipping in 24h or store pick-up (3 Lotissement Promo Sud, Ain Atig, 12040 Témara). We deliver all over Morocco. See our delivery methods.

How can I pay?

By bank transfer or cash on delivery.

Can I return a product?

Yes, returns are free within 14 days. Warranty & returns.

Need advice or a quote?

Our team is available Monday to Friday, 9am to 5pm, on +212 808 553 495. You can also request a quote or write to us.

How do I track my order?

Use the order tracking page.