ELEGOO Standard Photopolymer Resin 1.0 405nm for 3D Printer DLP/LCD 1000g White

Description

ELEGOO Standard Resin 1.0 — White, 405nm, 1 kg

White remains the default choice for validating a prototype or a technical part: under any lighting, edges, threads and assembly details are read unambiguously in photos or in quality control — which a translucent or dark resin makes more difficult. It is also the simplest base to prepare and paint over, if the part is to receive a finish afterwards.

Print settings

Bottom exposure: 60 s · Normal exposure: 8 s
Starting values — to be refined according to the printer and layer thickness.

Technical specifications

• Hardness: 84 D — Shrinkage: 7.1%
• Viscosity (25 °C): 150–200 mPa.s
• Liquid / solid density: 1.100 / 1.195 g/cm³
• Flexural strength: 59–70 MPa — Tensile strength: 36–53 MPa
• Elongation at break: 14.2%
• Storage: 1 year, away from light

Compatibility

LCD/DLP 3D printers — gives its best results on LCD printers (Mars, Saturn, Jupiter series).

Precautions

• Bien agiter avant chaque utilisation
• Print between 20 °C and 25 °C
• Gloves and mask required — avoid any contact with the skin
• Keep out of reach of children, away from dust and direct sunlight
• In case of contact with the skin, rinse immediately and thoroughly with water