eSUN Filament 3D ePLA-Matte Mint Green 1.75mm 1kg

Description

Filament Properties Table
3D PRINTING FILAMENT	ePLA-Matte
Density(g/cm3)	1.174
Heat Distortion Temp(℃,0.45MPa)	51
Melt Flow Index(g/10min)	2.1（190℃/2.16kg）
Tensile Strength(MPa)	34.56
Elongation at Break(%)	56.1
Flexural Strength(MPa)	41.21
Flexural Modulus(MPa)	1119.41
IZOD Impact Strength(kJ/㎡)	33.15
Durability	4/10
Printability	9/10
Recommended printing parameters
Extruder Temperature(℃)	190 – 230℃ Recommended temperature 215℃
Bed temperature(℃)	45 – 60°C
Fan Speed	100%
Printing Speed	40 – 100mm/s
Heated Bed	Optional
Recommended Build Surfaces	Masking paper, PVP solid glue, PEI

Description

Matte pla filament has no smell when printing, which is safe and environmentally friendly; And the reel is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte pla surface is delicate and does not show layer lines; the filament is not easy to break which made the printing is smooth for a long time without clogging. PLA matte filament can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.

Sellingpoint

Environmental friendly
Cost-effective
High-speed printing
Easy to peel off the support

Excellent printability
Hard to break
Matte surface effect
Low density

* Application

Decorative parts COSPLAY

* Print model

• 
• 
• 
• 
• 
• 
• 
•