IFUN – Temporary Resin, high precision, biocompatible

Energy saving and environmental protection self-developed, excellent mechanical properties, low shrinkage, precise and durable properties of new photopolymerized composite materials. The product is designed and developed for LCD/DLP type 3D printers, professional application in printing temporary crowns

Low-viscosity liquid resin facilitates coating and cleaning of objects and printing machines

Better strength and dimensional retention characteristics in humid environments

Low odor, no irritation. Formation stability and dimensional retention characteristics

Utilisation
Shake well before use. Avoid direct sunlight during use;

Do not put in mouth. Keep away from children;

Wear gloves before use to avoid direct skin contact and keep the room ventilated;
Finished models must be cleaned with high-concentration alcohol (>95%) for about 30

Seconds and a post-cure process may be required for higher hardness;
Please filter the residual resin in the vat into the container if it will not be used for 48 hours. Contaminated residual resin would cause printing problems.

Storage conditions

Please store in a cool, dark place. Please close the bottle cap after pouring the resin. If the resin is not used, do not turn the original bottle over .. The best storage temperature is 8 to 28 °C, too high or too low will affect the performance of the glue.